Applications and decisions · 10 min read

Architect and Structural Engineer Fees UK (2026): RIBA Stages, Costs & What's Included

UK architect fees in 2026 run 3–7% of build cost for planning & Building Regs drawings or 8–15% for full RIBA service; structural engineers cost £500–£3,000+.

Benjamin Alexander Planning Researcher Updated · First published General information, not legal advice
Check your postcode Free search · Paid alerts within hours
RECEIVED
Application · drawn for this guide
On this page 9 sections
  1. 01ARB Architect vs Architectural Technologist vs Architectural Designer
  2. 02RIBA Work Stages 1–7: Where Your Fee Actually Goes
  3. 03Realistic 2026 Cost Tables by Project Type
  4. 04Why Planning Drawings and Building Regs Drawings Diverge
  5. 05What a Structural Engineer Actually Costs & Delivers
  6. 06Hidden Survey & Specialist Consultant Costs to Check Early
  7. 07How to Scope Quotes and Avoid Fee Overruns
  8. 08Frequently Asked Questions
  9. 09Official Sources
Short answer

In 2026, UK architect fees typically cost 3% to 7% of the build cost (£2,500–£7,000 fixed fee) for planning and Building Regulations drawings, or 8% to 15% for a full RIBA Stages 1–6 service, while a structural engineer adds £500 to £3,500 depending on complexity. Across full residential developments, both the GLA London Plan Viability Study Phase 1 (July 2026, para 4.107) and the Croydon CIL Viability Review (March 2024, para 4.18) benchmark total combined professional fees at 10% of construction cost (with PlanWatch's appraisal engine modelling 10–12% on constrained sites).

Understanding what each professional actually produces — and where planning drawings stop and technical Building Regulations drawings begin — prevents the two costliest mistakes in UK residential projects: paying for full contract administration you do not need, or asking builders to quote from thin planning drawings that trigger huge variations on site.

ARB Architect vs Architectural Technologist vs Architectural Designer

In the UK, the title "architect" is legally protected under section 20 of the Architects Act 1997: only professionals on the Architects Registration Board (ARB) register may call themselves an architect (and RIBA denotes chartered membership of the Royal Institute of British Architects). However, you do not legally need an ARB architect to design a house extension, loft conversion, or new home.

Professional Registration / Body Typical 2026 Fee (Stages 1–4) Best Used For
ARB / RIBA Architect ARB Register / RIBA 5%–8% drawings; 8%–15% full service Listed buildings, conservation areas, complex layouts, two-storey extensions in strict boroughs, bespoke new builds
Chartered Architectural Technologist (MCIAT) CIAT 2%–5% (often fixed fee £2,000–£5,500) Technical detailing, Building Regulations packages, standard extensions, lofts, barn conversions
Architectural Designer / Draughtsperson No statutory register (check PI insurance) £1,200–£3,500 fixed fee Straightforward Permitted Development rear extensions or garage conversions
Planning Consultant (RTPI) RTPI £1,500–£5,000+ (policy statement / appeal) High-refusal councils, Green Belt, heritage statements, planning appeals (see planning consultant costs)
Chartered Structural Engineer (MIStructE / MICE) IStructE / ICE £400–£8,000+ depending on scope Steel beams, foundations, underpinning, roof trusses, retaining walls, basement boxes

Planning risk should drive your choice. In PlanWatch's sample of 9,613 decided extension applications (received January 2025 to November 2026), single-storey rear extensions achieved 91.2% approval, whereas two-storey extensions dropped to 85.9% — and in tougher councils such as Barnet (79.7% official 2025 MHCLG PS2 householder/"other" rate; 59.0% in PlanWatch's single-storey sample) or Croydon (84.9% householder; 60.1% minor), good design and local policy knowledge directly protect you from a £548+ resubmission and 4 months of delay.

RIBA Work Stages 1–7: Where Your Fee Actually Goes

Most UK architects structure fees around the RIBA Plan of Work (Stages 0–7). You can hire an architect for Stages 1–3 only (to secure planning permission), Stages 1–4 (up to Building Regulations and tender), or Stages 1–6 (full contract administration through handover).

RIBA Stage What Happens Typical Share of Full Fee Output You Receive
Stage 0–1: Preparation & Brief Site visit, brief, measured survey, constraints check (conservation area, trees, flood zone) 10% Measured existing drawings, initial feasibility & budget check
Stage 2: Concept Design 2–3 layout options, massing, daylight & neighbour impact check 15% Sketch plans, 3D views, preferred option sign-off
Stage 3: Spatial Coordination (Planning) Finalised planning drawings, Design & Access Statement, submission & officer liaison 20% Validated planning or LDC application & council decision
Stage 4: Technical Design (Building Regs & Tender) Detailed construction drawings, insulation/thermal specs, drainage, structural coordination, tender pack 30% Building Regulations package + builder pricing pack
Stage 5: Manufacturing & Construction Regular site visits, JCT contract administration, certifying staged builder valuations & variations 20% Site inspection notes, payment certificates, snagging list
Stage 6–7: Handover & Use Final inspection, defects liability sign-off (typically 6–12 months post-completion), final certificate 5% Practical completion & final retention release

Percentage Fee vs Fixed Fee vs Hourly Rate

  • Fixed fee (recommended for Stages 1–4): Protects you from fee creep if builder quotes come in 25% higher than expected. Always confirm what triggers extra charges (e.g., council-requested redesigns or appeals).
  • Percentage of construction cost (common for Stages 5–6): Typically 8%–15% for full service. Clarify whether the percentage applies to the pre-VAT build cost, whether kitchen/bathroom joinery is excluded, and whether the fee is capped at the tender figure rather than rising if material prices jump mid-build.
  • Hourly rates (used for ad-hoc advice or variations): In 2026, expect £80–£140/hr for a senior architect outside London and £120–£200/hr for a London director/partner (plus VAT).

Realistic 2026 Cost Tables by Project Type

The table below combines typical 2026 UK fee ranges for architectural drawings (Stages 1–4), structural engineering, measured surveys, and statutory council planning fees (England, from 1 April 2026).

Project Type (2026, England) Measured Survey Architect / CIAT (Stages 1–4) Structural Engineer Planning Fee (England, Apr 2026)* Combined Pre-Build Fees (ex VAT)
Single-storey rear extension (20m², £45k–£65k build) £500–£900 £2,200–£4,800 £700–£1,500 £548 (or £274 LDC / £249 Prior Approval) £3,950–£7,750
Two-storey extension (50–60m², £110k–£180k build) £700–£1,200 £4,500–£9,500 £1,500–£3,000 £548 £7,250–£14,250
Loft conversion with dormer (£50k–£80k build) £500–£900 £2,000–£4,500 £800–£1,800 £274 LDC (or £548 full) £3,575–£7,750
Basement conversion (London, £200k–£400k+ build) £1,500–£3,000 £15,000–£35,000+ £3,500–£9,000+ £548 (+ Basement Impact Assessment £3k–£8k) £23,500–£55,500+
Single new-build house (150m², £350k–£500k build) £1,200–£2,500 £12,000–£28,000 (Stages 1–4); £30k–£60k+ (full) £2,500–£5,500 £610 £16,300–£36,600 (drawings only)

*England statutory planning fees reflect the MHCLG 1 April 2026 indexation schedule. Draft regulations propose increases from 8 December 2026 (subject to parliamentary approval) to £575 householder, £287.50 LDC, and £310 prior approval. Check How Much Does Planning Permission Cost? for Wales, Scotland, and Northern Ireland.

Why Planning Drawings and Building Regs Drawings Diverge

Homeowners frequently ask why they must pay almost as much again for Stage 4 technical drawings after winning planning permission. The two sets of drawings answer completely different legal questions:

  • Planning drawings (Stage 3) are judged against local and national planning policy: height, depth, roofline, materials, overlooking, daylight, and street character. They are typically drawn at 1:100 or 1:50 and deliberately omit internal construction build-ups.
  • Building Regulations drawings (Stage 4) are judged against the Building Regulations 2010 (Approved Documents A–S): structural stability (Part A), fire safety and escape windows (Part B), damp-proofing (Part C), ventilation (Part F), drainage and build-over agreements (Part H), conservation of fuel and power / U-values (Part L), overheating (Part O), and electrical safety (Part P).

Trying to obtain accurate builder quotes from Stage 3 planning drawings alone is a false economy. Without Stage 4 specifications and structural calculations, every builder guesses different steel sizes, foundation depths, glazing U-values, and drainage connections — making quotes impossible to compare and virtually guaranteeing mid-build extras.

What a Structural Engineer Actually Costs & Delivers

A structural engineer's package consists of two things: stamped structural calculations (submitted to Building Control to prove compliance with Approved Document A) and structural mark-up drawings (showing the builder exact steel beam sections like 203x203x46 UC, padstone sizes, connection details, and foundation trench depths).

Common 2026 structural engineering fee drivers:

  • Opening up a rear wall / chimney removal: £400–£800 for a single beam calculation; £800–£1,400 for a goal-post steel frame (required where the remaining masonry piers are too narrow to provide lateral stability).
  • Soil type and nearby trees: Clay soils (common across London boroughs like Barnet, Camden, and Croydon) combined with mature trees trigger deeper foundations (2.0m–3.0m+) or piled foundations under NHBC Chapter 4.2, adding £600–£1,500 for soil/borehole investigation and specialist foundation design.
  • Thames Water / statutory sewer build-over: Building within 3m of a public sewer requires a Build-Over Agreement (£300–£600+ water authority fee) and often bridged/deepened foundations designed by your structural engineer.
  • Temporary works & underpinning: Basements and deep excavations require phased underpinning sequences and temporary propping calculations, pushing structural engineering fees to £3,500–£9,000+.

Hidden Survey & Specialist Consultant Costs to Check Early

Before you lock in your budget, check whether your plot's planning constraints will trigger mandatory third-party reports during Stage 3:

  • Tree Survey (BS 5837): £400–£1,200 where mature trees sit on or near the boundary (especially under TPOs or in Conservation Areas).
  • Bat / Preliminary Ecological Appraisal (PEA): £600–£1,800 for rural barns, older pitched roofs, or sites near woodland; emergence surveys add £1,200–£3,000+ and are strictly seasonal (May–September).
  • Flood Risk Assessment (FRA) / SuDS Drainage Strategy: £600–£2,500 in Flood Zones 2 or 3.
  • Heritage Statement / Daylight & Sunlight Assessment: £800–£3,500 in Conservation Areas, listed buildings, or dense urban terraces (see Leeds, Bristol, Westminster, and Kensington and Chelsea).
  • SAP / Thermal Calculations (Part L): £250–£600 when glazing exceeds 25% of the new extension's floor area (very common with wide bifold doors and roof lanterns).

How to Scope Quotes and Avoid Fee Overruns

  1. Ask for a staged fee proposal with break clauses. Never sign a single commitment for Stages 1–6 before you know whether planning will be granted and whether builder tenders fit your budget.
  2. Confirm who owns the CAD / BIM files. Ensure your appointment letter grants you a licence to use the drawings with any contractor or Building Control body once each stage is paid.
  3. Check Professional Indemnity (PI) insurance. Ask for at least £1m PI cover (standard for ARB/RIBA and CIAT practices) — essential if a structural or regulatory error surfaces years later.
  4. Cross-check build costs before Stage 3 submission. Roughly 30–40% of homeowners discover their approved design exceeds their budget only when builder quotes return. Benchmark your scheme early against our UK build costs guide, house extension cost guide, or — for multi-unit plots — our residual land value calculator.

Official Sources

Frequently Asked Questions

How much does an architect charge for a house extension in the UK in 2026?

For planning and Building Regulations drawings only (RIBA Stages 1–4), expect £2,500–£7,000 fixed fee (or 3–7% of build cost) for a typical £50,000–£100,000 extension. A full architect service including tender and site administration (RIBA Stages 1–6) typically costs 8–15% of the net construction cost, plus VAT.

Do I need a registered architect or is an architectural technologist enough?

You do not legally need an ARB-registered architect to submit a planning or Building Regulations application in the UK. A Chartered Architectural Technologist (MCIAT) or experienced architectural designer often charges 20–40% less (typically 2–5% for drawings) and is well suited to standard extensions and loft conversions. An ARB/RIBA architect adds most value on listed buildings, conservation areas, tight urban plots, or complex bespoke designs.

How much does a structural engineer cost in 2026?

Simple single-beam calculations (such as removing a load-bearing wall) cost £400–£800. A full structural package for a single-storey extension or loft conversion typically runs £800–£2,000, rising to £1,800–£3,500 for a two-storey extension and £3,000–£8,000+ for a basement or underpinning scheme.

Why aren't planning drawings enough for my builder or Building Control?

Planning drawings show external appearance, siting, height, and neighbour impact (scale 1:100 or 1:50). They do not specify steel beam sizes, foundation depths, insulation U-values, fire escape routes, or drainage gradients. Building Control and your builder need a separate technical Building Regulations package (RIBA Stage 4) plus structural engineer calculations.

How much should I budget for total professional fees on a renovation or new build?

PlanWatch's development appraisal benchmark — drawn from the GLA London Plan Viability Study Phase 1 (July 2026, para 4.107) and Croydon CIL Viability Review (March 2024, para 4.18) — budgets 10% of construction cost for all professional fees combined (architect, structural engineer, quantity surveyor, and specialist surveys), rising to 12% on complex or constrained sites.

Are architect and structural engineer fees subject to VAT?

Usually yes, at 20%, if the practice is VAT-registered (turnover above £90,000). Even on zero-rated new-build dwellings where the builder's construction work is 0% VAT, standalone architect and structural engineer fees remain standard-rated at 20% VAT — unless bundled into a single design-and-build contract.

Disclaimer: PlanWatch provides general information about UK planning processes. This content is not legal advice. Planning law is complex and varies by local authority. Consult a qualified planning consultant or solicitor for advice specific to your situation.

Your project · 11 min House Extension Cost UK 2026: Prices per m² and Approval Odds What a house extension costs in 2026: single-storey, kitchen, side return, wraparound and two-storey prices per m² from UK cost guides, the extras quotes miss, and approval rates from 9,613 real planning decisions. Applications and decisions · 9 min Building Control vs Approved Inspector (RBCA) in 2026: Costs, Rules & Certificates Compare Local Authority Building Control (LABC) vs Registered Building Control Approvers (formerly Approved Inspectors) in 2026: fees, inspections, and BSA rules. Near you · 11 min Party Wall Surveyor Cost UK (2026): Fees, Agreed vs Two Surveyors & Timelines Party wall surveyor costs in England and Wales run £700–£1,500 for an agreed surveyor or £1,800–£3,500+ for two surveyors per neighbour. Full 2026 breakdown. Applications and decisions · 8 min Planning Consultant Cost UK 2026: Fees, Appeals and Refusals What a planning consultant costs in 2026: hourly rates, fixed fees for householder applications and appeals, council pre-app fees, and when paying for help after a refusal is worth it. Uses real refusal and appeal data. Applications and decisions · 11 min How Much Does Planning Permission Cost? New £575 Fee From 8 December 2026 Planning fees rise on 8 December 2026: the householder fee goes from £548 to £575, outbuildings £272 to £285, new homes £752 each. Apply before then to pay less. Every new fee, with real totals. Your project · 16 min Planning Permission vs Building Regulations: Which Do You Need? (25-Project Table) Planning permission vs building regulations in England: what each covers, plus a 25-project table (extension, loft, wall removal, solar, en-suite) with sources.

Planning near you

See every planning application a council has received, by area.

Planning near you

Check Your Area

Inspect approved planning drawings and recent extensions on your street before commissioning an architect.

  • Free search
  • Save a postcode free
  • Paid alerts within hours
Free — no card needed

Save a postcode to your free PlanWatch account

Free accounts save one postcode so it is ready whenever you want to check what has been applied for nearby. Paid plans add email alerts for new applications near a saved postcode, sent within hours of them reaching the council register.

Free: search plus one saved postcode. We never sell your details, and you can remove your postcode at any time.

Find your council →